BAM - belting range

  • PN Belts
  • Steel Cord Belts
  • Strongflex / Novobelt
  • Aramid Belts
  • Inclined Conveying
  • Pipe Conveyors
  • Plaster Board Belts

Polyester / Polyamid Reinforced Belts

  • Strength classes from 125 N/mm to 3150 N/mm, between two and eight fabric plies
  • For lumpy, sharp edged or abrasive material, for e.g.rock or ores
  • Oil, and grease, or chemical resistant cover grades
  • Heat resistant cover grades up to 250°C Material (peak) temperature available
  • Other cover grades or special constructions (sliding bottom or profiled cover on request)
  • Flame resistant or extinguishing according to ISO 340, or other standards
  • Splicing by hot or cold vulcanization, step-splice.

BAM- Accessories

  • Sealing systems and Glide Bar
  • Wear liner
  • Pulley lagging
  • Idlers & Rollers
  • Inspection Hatch
  • Hold Back
  • Pre- T- and Arm Cleaners
  • Impact bars
  • Belt Guiding system
  • Roller sleeves
  • Impact Cradle or Adaptor
  • Belt Brush
  • Covers

BAM-Conveyor belt cleaning Systems ,wet abrasive material’s Conveyor accessories.

Belt Cleaner

Product features

    • Constant blade to belt contact
      pressure
    • Constant blade to belt contact
      area
    • Constant blade to belt angle
    • High operational safety
    • Reduced cost per ton

Customer Benefits

  • High efficiency
  • Reduced Maintenance cost
  • Reduced Carry back
  • Long wear Life
  • Low Cost per Ton
  • Primary Cleaner is installed On Face of the Head Pulley Below
    Material Trajectory. Secondary Cleaner is installed on the
    return side where the belt leaves the head pulley.
  • Tertiary Cleaner or additional cleaners are be installed further backwards on the return side of the
    belt.